pg. 4
iWoofer App Quick Start
Note: All screenshots shown are from the iOS version of the app. These instructions will work for the
Android app as well, but the look of the app is different.
1) Navigate to the app store of your smart device and search for the “iWoofer” or “iWoofer Pro”
app by Artem Khlyupin and install it.
2) As long as your DSP-LF has power and the Bluetooth of your smart device is turned on, you will
see a seemingly random string of letters and numbers when opening the app (this can be
renamed in the options menu of the app). Press this one, or if you don't yet have a DSP-LF, press
demo mode to view the app. If you have multiple DSP-LF devices, they will all show up here.
Troubleshooting: The device will enter standby after a while if it does not sense any input signal
and will not show up on this screen. If this happens to you, either unplug your device and plug it
back in, or provide an input signal to kick it out of standby. If this does not work, make sure no
other smart device is connected to the DSP-LF with the iWoofer app. Otherwise, try a different
smartphone or tablet.
3) After connecting to the DSP-LF hardware, you should see the home screen of the app like below
(room correction will not be available if you don't use the pro app).
To Next Page
Loading...