Need help?Do you have a question about the DaytonAudio SPA250DSP and is the answer not in the manual?
General| Frequency Response | 20 Hz - 200 Hz |
|---|---|
| Amplifier Type | Class D |
| THD+N | < 0.1% |
| Minimum Impedance | 4 ohms |
| Signal to Noise Ratio | > 100 dB |
| Input Impedance | 10 kOhms |
| Phase Switch | Yes |
| Power Output | 250W RMS |
| Peak Power | 500W |
| Inputs | RCA |
| Outputs | RCA |
| High Cut Frequency | 50Hz - 200Hz |
| Bass Boost | 0 to +12 dB |
| Phase Adjustment | 0 / 180 degrees |
| Driver Size | 10" |
| Low Pass Filter | 50 Hz - 200 Hz |
| Power Requirements | 110-240 VAC, 50/60 Hz |
Crucial safety guidelines to prevent electric shock and fire, covering installation, operation, and maintenance.
Defines power states (Auto, On) and input attenuation (Normal, Hi) for analog inputs.
Explains USB Control, Feature Control knob, Limiter LED, and Standby/On LED indicators.
Illustrates the connection points for the positive and negative terminals of the speaker driver.
Visual representation of the amplifier's internal system components and signal flow.
Illustrates the signal processing stages within the Digital Signal Processor (DSP).
Details the 'Tools' menu options: Read, Save, Load settings, and Reset to default.
Explains GUI elements like USB link indicator, processing selection, and input/output monitors.
Details controls for Low Pass Filter (LPF) and Subsonic Filter: ON/OFF, Slope, and Frequency.
Describes the graphical PEQ window and detailed tooltips for Band On/Off, Frequency, Gain, and Q.
Details dual-band limiter settings: Threshold, Attack, Release, and Crossover Frequency.
Explains DSP parameters for line level output, including Delay and High Pass Filter (HPF) control.
Explains using the rotary control for single-click selection and double-click return in the menu.
Lists the main features accessible via the menu: Volume, Phase, LPF, HPF, Subsonic, PEQ, and Presets.
Flowchart details navigating Volume, High Pass Filter (HPF), and Low Pass Filter (LPF) settings.
Flowchart details navigating Phase Degree, High Pass Delay, and Subsonic Filter settings.
Flowchart details navigating PEQ settings (Frequency, Gain, Q) and Preset Save/Load.
Summarizes DSP functions accessible via the single-knob controller: Volume, HPF, LPF, Phase, Subsonic, PEQ.
Summarizes advanced DSP functions via PC GUI: I/O meter, 5-Band EQ, and Limiter controls.
Details input sensitivity, gain, saturation level, noise level, and THD+N ratio.
Lists output power, protection features, power consumption at various voltages, and dimensions.
Outlines the 5-year warranty, coverage, and common exclusions like misuse or neglect.
Provides instructions on how to obtain warranty service, including return authorization and packaging.
To Next Page
