Need help?Do you have a question about the DaytonAudio SUB-1200 and is the answer not in the manual?
General| Type | Powered Subwoofer |
|---|---|
| Driver Size | 12 inches |
| Power Output (RMS) | 120 Watts |
| Peak Power | 240 Watts |
| Enclosure Type | Bass Reflex |
| Phase Switch | 0/180 degrees |
| Frequency Response | 140 Hz |
| Inputs | RCA, Speaker Level |
| Low Pass Filter | 40Hz - 140Hz, Continuously Variable |
Introduction to the Dayton Audio SUB-1200, highlighting its features like bass reflex design and 120W power.
Explains Line Level Inputs, High Level Inputs, and High Level Outputs for connecting the subwoofer.
Details the Crossover Frequency, Gain, and Phase controls on the subwoofer.
Describes the Auto On/Off power switch functionality and LED indicators.
Guidance on optimal subwoofer placement for improved bass response, especially in corners.
Key technical details including dimensions, frequency response, power, and weight.
Details on the 5-year warranty, what is covered, and common exclusions.
Instructions on how to contact service, obtain a return authorization number, and pack the product.
Notice regarding chemicals in the product known to cause cancer or birth defects in California.
To Next Page
