Need help?Do you have a question about the DaytonAudio SUB-1000L and is the answer not in the manual?
General| Type | Powered Subwoofer |
|---|---|
| Driver Size | 10 inches |
| Power Output | 100 Watts RMS |
| Enclosure Type | Bass Reflex |
| Dimensions | 14.5 x 14.5 x 14.5 inches |
| Frequency Response | 30Hz - 140Hz |
| Inputs | RCA and Speaker Level Inputs |
| Phase | 0/180 degrees |
| Woofer | 10" high-excursion woofer |
Connect pre-out or preamplifier outputs to the subwoofer amplifier's internal crossover. Summed to mono.
Use high-level (speaker) inputs if preamplifier outputs are unavailable. Connect speaker wire directly to the amplifier.
Outputs connect to main speakers or another powered subwoofer with high-level inputs. Paralleled to inputs.
Continuously variable from 40 Hz to 140 Hz. Set for clear bass, normally 60-80 Hz.
Adjusts subwoofer output level to blend with other speakers. Avoid setting too high to prevent 'boomy' sound.
Selectable between 0° and 180°. Aids subwoofer placement for most apparent bass output.
Amplifier turns on automatically when a signal is present. LED is red when idle, green when active.
Excludes consequential damage, misuse, abuse, neglect, or accident. Applies to defects in material and workmanship.
Lifetime warranty for HDMI cables. 45-day return policy applies to unassembled kits.
Instructions for sending the product for non-warranty repair or replacement. Contact company for details.
To Next Page
