DaytonAudio SUB-1000 User Manual

10" 100W
POWERED
SUBWOOFER
Model: SUB-1000 User Manual
Dayton Audio
®
Last Revised: 3/20/2015
daytonaudio.com
tel + 937.743.8248
info@daytonaudio.com
705 Pleasant Valley Dr.
Springboro, OH 45066
USA
Warranty Information
Dayton Audio products are warranted free from defects in material and workmanship for 5 years
from date of purchase. 1 year warranty applies to the following products: powered subwoofers and
electronic devices (e.g. subwoofer amplifi ers, and plate amplifi ers, as well as the Omnimic V2 and
DATS loudspeaker testing devices). In the rare case of a product failure, please contact your place
of purchase or call our Customer Support Department at (937) 743-8248.
Warranty Limitations
There are no other warranties, either expressed or implied, that extend the foregoing, and there
are no warranties of merchantability or fi tness for any particular purpose. Dayton Audio is not
responsible for any consequential or inconsequential damage to any other unit or component or the
cost for installation or extraction of any component of the audio system, or for the improper use of
products. This includes but is not limited to burnt voice coils, overheating, bent frames, holes in the
cone, or broken lead wires.
This warranty gives you specifi c legal rights and you may also have other rights that vary from state
to state.
Non-Warranty Service: If non-warranty service is required, the product may be sent to the
Company for repair/replacement, transportation prepaid, by calling (937) 743-8248 for details,
complete instructions, and service fee charges.

DaytonAudio SUB-1000 Specifications

General

Brand	DaytonAudio
Model	SUB-1000
Category	Subwoofer
Language	English

Summary

Warranty Information

Warranty Details

Dayton Audio products warranted free from defects for 5 years, 1 year for powered subwoofers/electronics.

Warranty Limitations

No other warranties, expressed or implied. Not responsible for consequential damage or improper use.

Non-Warranty Service

Product may be sent for repair/replacement. Contact for details and fees.

Hookup Guide

Line Level Inputs

Connect pre-out or preamplifier outputs. Summed to mono, preferred connection.

High Level Inputs and Outputs

Use speaker level inputs if pre-amp outputs unavailable. High level outputs connect to other speakers/subs.

Controls and Features

Crossover, Gain, Phase, and Power Switch (Auto On/Off) adjustments for optimal performance.

Room Placement and Specifications

Room Placement

Optimal placement for enhanced bass response, typically in a corner.

Product Specifications

Details dimensions, frequency response, power, voltage, and net weight.