Need help?Do you have a question about the DayTronic 3000 series and is the answer not in the manual?
Specifies the 0 to ±5 V analog output with overrange and filtering characteristics.
Details how 3000 Series instruments can be mounted as bench-top, rack, or panel units.
Instructions for connecting the instrument to an AC power source.
Guidance on connecting transducers via the I/O connector and wiring types.
Explains how to select the desired full-scale frequency range using switches.
Procedure to adjust the front-panel ZERO control for zero output.
Procedure to adjust SPAN controls for 80% of full-scale output.
Steps to take if the unit is totally inoperational, checking the fuse.
To Next Page
General