CONNECTING THE INPUTS
4. Now insert the speaker assembly from the TOP A side using the hole
located on the bottom side.
ATTENTION!
• Make sure that ES-TOP A is rmly in
place, but never forcibly rotate it during
installation, do avoid damaging the
coupling system.
• Never transport the ES-TOP A and ES-TOP
B speakers while they are coupled to each
other; always detach them when carrying
them to avoid damaging the couplings.
• For ES 802 only, make sure that you install
ES-TOP A on the pole as shown in the
gure and and not ES-TOP B, as the cable
needs to be connected from the subwoofer
to this specic satellite.
To Next Page
Loading...
