Need help?Do you have a question about the DBS HC-3208 and is the answer not in the manual?
Restores all scanner settings to their original factory default configuration.
Configures the scanner for standard keyboard output via USB connection.
Configures the scanner for virtual serial output via USB connection.
Configures the scanner for serial output using the TTL/RS232 interface.
Scanner operates when the trigger is pressed, stopping when released or after a set time.
Scanner continuously reads barcodes without manual trigger activation.
Scanner automatically detects and reads barcodes based on scene changes.
Enables all supported barcode symbologies for scanning.
General| Resolution | 4 mil |
|---|---|
| Power Supply | 5V DC |
| Type | Handheld |
| Scan Rate | 100 scans per second |
| Interface | USB |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Storage Temperature | -20°C to 60°C |
| Humidity | 5% to 85% RH (non-condensing) |
To Next Page