Need help?Do you have a question about the DCS ATrack AK11 and is the answer not in the manual?
General| GPS Sensitivity | -162 dBm |
|---|---|
| TTFF (Open Sky) Hot start | 1s |
| Analog Inputs | 1 |
| Antenna | Internal |
| Accelerometer | Yes |
| Channels | 50 |
| Update Rate | 1 Hz |
| Time to First Fix (Hot Start) | 1s |
| Antenna Type | Internal |
| GSM | GSM 850/900/1800/1900 MHz |
| Protocols | TCP, UDP |
| Humidity | 5% to 95% non-condensing |
| GPS | u-blox All-In-One GPS receiver |
| Position Accuracy | 2.5 m |
| GPS Chipset | u-blox All-In-One GPS receiver |
| Baud Rate | 9600 bps |
Legal statement limiting liability and defining terms of use for the document and products.
Details ATrack Technology Inc.'s ownership of intellectual property and restrictions on document disclosure.
Alerts users to potential hazards associated with electrical system connections and requires installer qualification.
Lists and illustrates all components included in the AK11 device package for verification.
Step-by-step instructions for correctly inserting a SIM card into the AK11 device.
Detailed mapping of pins for power and I/O functions, including wire colors and designations.
Guide to using the AT$IOCG command to set I/O pin modes (input, output, analog).
Diagram and table detailing the pinout for the AK11's DLC (Data Link Connector) port.
Instructions for identifying the USB port and installing the necessary drivers for AK11 connectivity.
Explanation of the AK11's LED indicators, their colors, and operational status meanings.
Command syntax and parameters for setting Bluetooth connection properties like name, password, and format.
Instructions for downloading and using the 'Terminal IO' app to connect and scan the AK11 via Bluetooth.
Information on obtaining the Software Development Kit (SDK) for custom Android and iOS applications.
Command to enable, configure SSID, encryption, and client limits for the AK11 WiFi HotSpot.
Details on setting up IP Blacklists or Whitelists using the AT$IPFC command for network security.
Command to monitor and set limits for data upload and download usage, with reset intervals.
Step-by-step guide to configuring HyperTerminal for console communication with the AK11 device.
Instructions for enabling GPRS/UMTS and connecting the AK11 to a remote server using ATrack Server Tool.
Command to set the AK11 for AT&T or US Cellular networks.
To Next Page