EasyManua.ls Logo

DCS CS-364G User Manual

DCS CS-364G
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CS COOKTOP SERIES
Installation Guide
MODELS:
CS-366
CS-364GL
CS-364G
CS-484GG
CS-486GL
CS-486GD
CS-485GD
Question and Answer IconNeed help?

Do you have a question about the DCS CS-364G and is the answer not in the manual?

DCS CS-364G Specifications

General IconGeneral
BrandDCS
ModelCS-364G
CategoryCooktop
LanguageEnglish

Summary

A MESSAGE TO OUR CUSTOMERS

INTRODUCTION

Important Installation Information

Key installation guidelines and compliance with codes for safe operation.

MODELS

48" CS Cooktop Models

Visual representation of the 48-inch DCS CS Cooktop models available.

36" CS Cooktop Models

Visual representation of the 36-inch DCS CS Cooktop models available.

PLANNING THE INSTALLATION

Recommended Installation Instruction

Steps for installing a full backguard with the cooktop, including vent hood and backguard placement.

UNPACKING AND HANDLING

Moving and Placing the Cooktop

Instructions for safely moving and positioning the heavy cooktop unit during installation.

Anchoring the Cooktop

Guidance on securing the cooktop, noting it's designed to rest on the counter top.

VENTILATION REQUIREMENTS

Ventilation Recommendations

Chart detailing minimum blower capacity for hood ventilation based on cooktop size and installation type.

CABINET PREPARATION

Cabinet and Countertop Opening Preparation

Instructions for preparing cabinet and countertop openings, including clearances and support requirements.

Cutting Cabinet Openings

Details on cutting openings for standard and deep counter installations, including cutouts for gas and power.

BACKGUARD INSTALLATION

Backguard Kits and Installation

Information on backguard kits and when installation is required based on clearances.

ELECTRICAL / GAS CONNECTIONS

Electrical Connections

Power requirements, grounding methods, and connection procedures for the cooktop.

Recommended Grounding Method

Proper grounding procedures for the appliance to ensure electrical safety.

Gas Requirements

Details on natural gas and LP gas connections, including pressure and regulator requirements.

HOOK-UP TO GAS SUPPLY

Gas Supply Hook-Up Procedure

Steps for connecting the cooktop to the gas supply, including manual shut-off valve and flex line connection.

TEST AND ADJUSTMENTS

Burner Test and Adjustment

Procedures for testing and adjusting burner flames, including air shutter settings for griddle and grill.

Surface Burner Operation

Information on surface burner ignition troubleshooting and normal operation.

Exterior Surface Cleaning

Guidelines for cleaning the stainless steel surfaces of the cooktop.

INSTALLER FINAL CHECKLIST

General Installation Checks

Checklist for general installation aspects like placement, level, and packaging removal.

Electrical System Checks

Checklist for electrical connections, receptacle, and grounding.

Gas Supply System Checks

Checklist for gas supply connection, compatibility, pressure, and leak testing.

Operation Checks

Checklist for verifying burner ignition, flame adjustment, and component seating.

CS 36" / 48" WIRING DIAGRAM

CS 36" / 48" SCHEMATIC

CS 485 WIRING DIAGRAM

CS 485 WIRING SCHEMATIC

HOW TO OBTAIN SERVICE

WARRANTY

Warranty Length and Coverage

Details on the duration and scope of the warranty for parts and labor.

What DCS Will Pay For

List of services and parts covered by the manufacturer's warranty.

What DCS Will Not Pay For

List of exclusions from the warranty, including installation and misuse.

Related product manuals