EasyManuals Logo

DCS RF24DE4 User Manual

DCS RF24DE4
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
NOTE
Electrical Shock Hazard
Do not use an extension cord with this appliance.
They can be hazardous and can degrade product
performance.
This appliance should not, under any circumstanc-
es, be installed to an un-grounded electrical supply.
Do not remove the grounding prong from the power
cord. (See Figure 3).
Do not use an adapter. (See Figure 4).
Do not splash or spray water from a hose on the
appliance. Doing so may cause an electrical shock,
which may result in severe injury or death.
!
WARNING
Ground Fault Circuit Interrupters (GFCI) are prone to nui-
sance tripping which will cause the appliance to shut down.
GFCI’s are generally not used on circuits with power equip-
ment that must run unattended for long periods of time, un-
less required to meet local building codes and ordinances.
Electrical Connection
A grounded 115 volt, 15 amp dedicated circuit is required.
This product is factory equipped with a power supply
cord that has a three-pronged, grounded plug. It must be
plugged into a mating grounding type receptacle in accor-
dance with the National Electrical Code and applicable lo-
cal codes and ordinances (see Figure 5). If the circuit does
not have a grounding type receptacle, it is the responsibility
and obligation of the customer to provide the proper power
supply. The third ground prong should not, under any cir-
cumstances, be cut or removed.
Figure 5
INSTALLING YOUR APPLIANCE
Figure 3
Figure 4
Do not remove
ground prong

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DCS RF24DE4 and is the answer not in the manual?

DCS RF24DE4 Specifications

General IconGeneral
BrandDCS
ModelRF24DE4
CategoryLCD Drawer
LanguageEnglish

Related product manuals