EasyManua.ls Logo

DCS RGV2-366 - Component Removal and Replacement

DCS RGV2-366
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40
CARE AND CLEANING
Removing and replacing the oven door
IMPORTANT!
Do not lift the oven door by its handle. Doing so may damage the door.
Make sure the oven and the door are cool before you begin to remove the door.
Before removing the door, make sure there is a large enough clear, protected surface
in the kitchen to rest the door on.
Take care, the oven door is heavy!
To remove the oven door
1 Open the door fully.
3 Holding the door firmly on both sides,
gently close it about halfway.
4 Disengage the hinges and remove the
door. Place on a protected surface.
2 Open the levers fully on both sides.
Lever

Related product manuals