De Agostini Model Space C57 - The switchboard and battery box; Your parts & Tools; Step 1: Washer Preparation

Tools
Where your parts t
202
Step by step: Stage 89
The switchboard
and battery box
Battery box
Battery box cover
Switchplate
Switchboard
Switches
Motor cable
Battery cable
Light cable
Hex nuts x 10
Washers x 5
Screws (2.6 x 8mm) x 5
Screws (2.3 x 8mm) x 6
Tweezers
Phillips screwdriver
Pliers
(Optional)
Synthetic rubber adhesive (SRA)
1
Locate the pin and tab on each washer
before you use it.
Lay the switchboard with its at face down,
then t the washers to it as shown above.
There is no need to fully adhere
the washers, but a dot of SRA will
help hold them in place for the
rest of the assembly.
Your parts
Battery box (underneath)
Switches
Tab
Tabs in these holes
Pin