Translation of the original operating manual • DECON • 03/03/2021 • V1.01 • 9126481 • EN
71
Normal daily operation of the appliance
Control
► Press lightly against the ‹door handle›.
▼ The ‹appliance door› is locked and closed automatically.
» Finished.
Info
On request, the function “Automatic program start after door closing” can also be activated on
the appliance. The door closing automatically starts the program. It is then usually no longer
necessary to press the START button. The function can be set with oven parameter OP.082.
8.2.5.4 Emergency interlock release
>
Control
>
Normal daily operation of the appliance
>
Opening and closing the appliance door
>
Emergency interlock release
Info
If the door opening fails, push hard against the door handle and then try again by pressing the
DOOR button. In case of emergency, the appliance door can be opened with the emergency
interlock release.
Requirement:
• The door opening of the appliance door fails.
Carry out the following steps:
► Firmly pull the emergency interlock release (bowden cable with key ring) behind the ‹front
panel›.
▼ The appliance door is open.
» Finished.
To Next Page
Loading...