RUNNER 3
MANUFACTURER’S RESPONSIBILITIES
The Manufacturer shall not accept responsibility for problems, breakage, accidents, etc. due to lack
of knowledge of the instructions in this Manual or failure to apply these.
The same applies to unauthorized modifications, variations and/or installations of accessories.
The Manufacturer declines all liability for damage deriving from:
- Improper use
- Incorrect operations
- Lack of maintenance
- Technical intervention by unskilled persons
- Use of spare parts that are not genuine
SPARE PARTS
For replacement, use exclusively ORIGINAL SPARE PARTS .
Do not wait until the components are worn from use; replacing a component at the right time means
better working of the machine and at the same time saving due to absence of abnormal wear of the
connected components.
TECHNICAL SERVICE
The Manufacturer has a commercial/technical network to provide the Customer with technical
service to help solve problems related to the use and maintenance of the machine.
REQUEST FOR ASSISTANCE
Requests for assistance, if any, must include indication of the type of problem or fault encountered.
The machine serial number must be indicated in the request.
Contact the manufacturer or area dealer for assistance.
WARNING
The manufacturer reserves the right to modify the machine at any moment according to the
technical/commercial requirements; therefore, there may be slight differences between the contents
of the commercial catalogues and the machine delivered.
To Next Page
Loading...
General