RUNNER 4
2/1 – NAME, IDENTIFICATION AND DESCRIPTION
NAME AND DESCRIPTION OF THE MACHINE
Electromechanical ride-on scrubber-drier for floors, suitable for washing and drying smooth, uniform
floors covered with grès, cotto, marble, ceramic, clinker, cement, PVC, linoleum, etc., free of steps
or obstacles.
The mechanical cleaning action is performed by rotary brushes the pressure of which on the floor
can be adjusted, depending on the surfaces; the chemical action is performed by the detergent
water solution given out at the centre of the brushes during the machine operating phases. The
suction is brought about by the rear drying unit which consists of a pair of squeegees made of a
special soft material which scrape the pavement, and by means of the depression between the two
squeegees allow the drier to absorb the remaining wash water, leaving the floor clean and dry.
IDENTIFICATION
Plate affixed on the chassis, on the inner part of the safety casing.
USE AND MAINTENANCE
To Next Page
Loading...