Decagon Devices AquaLab 4TE Installation Qualification/Operational Qualification Protocols And Instructions

Decagon Devices, Inc June 28, 2016 11:24 AM 8
Remarks: N/A
Qualified by:
Date: Initials:
2.4 Environmental Conditions
Installation of the AquaLab Water Activity instrument includes placing the instrument on a level surface in a
location where the temperature remains fairly stable. This location should be well away from air conditioner
and heater vents, open windows, outside doors, or other items that may cause rapid
temperature fluctuation.
Location Satisfactory Not Satisfactory
Adequate Power Satisfactory Not Satisfactory
Stable Surface Satisfactory Not Satisfactory
Temperature Satisfactory Not Satisfactory
Remarks: N/A
Qualified by:
Date: Initials:
2.5 Power Up Test
After finding a good location for the AquaLab Water Activity meter, plug the power cord into the back of the
unit and a standard AC outlet. The ON/OFF switch is located in the lower left corner of the back panel.
Instrument is powered upon switching on Yes No
Remarks: N/A

Decagon Devices AquaLab 4TE Specifications

General

Brand	Decagon Devices
Model	AquaLab 4TE
Category	Measuring Instruments
Language	English