5
MAINTENANCE
bulb using a new 40 W type B-10
candelabra light bulb.
STEP 4: Reinstall the logset.
STEP 5: Plug in the unit.
CLEANING
To clean unit, first turn off the controls on the
unit and unplug the unit from power source.
To clean glass door; remove dust with clean
dry cloth or to remove finger prints and other
marks clean glass with clean damp cloth. Do
not use abrasive cleaners or spray liquids on
the glass door surface.
Metal and metal painted parts should be
cleaned with damp cloth. Do not use abrasive
cleaners or spray liquids on these surfaces.
STORAGE
When the heater is not in use, the heater
should be stored in a dry location, away from
possible damage. The power cord should be
stored properly to avoid contact with hot or
sharp objects.
To Next Page
