18
Handling for idle for a long term
Remove the damaged fuse
Install a good fuse (5A 220V)
Install the fuse cover into the socket
Please do the following work before keep the oxygen generator lying idle
for a long term.
1、Remove the humidification water tank, pour out the water in the water
tank, air-dry it, and install it back in place.
2、Cut off the power supply and retract the power line.
3、Do not store the oxygen generator in humid and dusty environment,
avoid direct sunlight and pollution, dry and store the oxygen inhalation
tube and oxygen inhaler at room temperature, do not bend the gas-guide
tube, and keep out of reach of infants. Please make the following prepara-
tions before reusing the oxygen generator which has been idle for a long
term.
⑴、Check whether the power line is damaged.
⑵、Clean the oxygen inhalation tube and oxygen inhaler, and check
whether any is blocked or bent.
⑶、Clean the humidification water tank.
To Next Page
Loading...
