4/ CLEANING THE HOOD
EN
35
Carefulmaintenancehelpsguaranteeproperoperationandgoodresultsfromanapplianceovertime.
The hood must be unplugged from the electrical power source, both by unplugging the
appliance from the socket as well as de-activating the breaker, before removing the metal l-
ters. After cleaning, you must replace the metal lters as outlined in the instructions.
MAINTENANCE
HOW TO PROCEED?
ACCESSORY PRODUCTS TO USE
External
surfaces and
accessories
Do not use metallic scrubbers,
abrasive products, or hard bru-
shes.
Tocleantheexternalsurfacesofthe
hoodandthelighthousingscreenuse
onlycommerciallyavailablehousehold
detergentsdilutedinwater.Thenrin-
sewithcleanwateranddrywithasoft
cloth.
Filter cartri-
dge
After30hours’operation,thebutton
padwillsignalthatthegreaselteris
saturatedbyashingthe4speedLEDs.
Pressthetimerbuttontoreset.
Thegreaselterscanbewashedby
hand or in the dishwasher. These
ltersneedtobecleanedonaregu-
larbasisbecauseotherwisetheymay
presentarerisk.Retthegrease
ltersandfrontpanel,makingsure
that the panel is properly tted at
thesides sothatitdoesnot cause
thedowndrafttostopoperating.
Active
carbonlter
Intherecirculationmode,youmust
substitutetheactivecarbonlterpe-
riodically.Toremovethebrepanel
youmustrstremovetheanti-grea-
segrillandpulltheplasticknobon
thepanelitself,removingitfromits
housing. To replace theactive car-
bon lter, do the reverse. Replace
theusedcarbonlteronanaverage
ofeverysixmonths.
TopreservetheapplianceweadviseyoutouseClearitmaintenanceproducts.
Clearit The experience of
professionals at your service
Clearitoersappropriateprofessionalproductsandsolutionsfortheday-to-daymaintenanceofyourhou-
seholdappliancesandkitchens.Youwillndtheseproductsonsaleatyourusualretailertogetherwithan
entirelineofaccessoriesandcomplementaryproducts.