DeDietrich Diematic iSystem - Page 4

88 pages

To Next Page

To Previous Page

7.5 Failure history .....................................................80

7.6 Parameter and input/output check (mode

tests) ....................................................................80

7.6.1 Control system sequence ......................................83

31082018 - 7600691-001-06

Main Page

Default Chapter2
- Table of Contents2
Introduction5
Symbols Used5
Abbreviations5
Liabilities5
- Manufacturer's Liability5
- Installer's Liability6
- User's Liability6
Certifications7
Safety Instructions and Recommendations8
Recommendations8
Technical Specifications9
Sensor Characteristics9
Installation10
Package List10
- Standard Delivery10
- Accessories10
Installing the Outside Sensor11
- Choice of the Location11
- Connecting the Outside Sensor11
Fitting and Connecting the Control Panel12
Electrical Connections12
- Connecting a Direct Heating Circuit12
- Connecting a Direct Heating Circuit and a Domestic Hot Water Tank13
- Connecting Two Circuits and a Domestic Hot Water Tank15
- Connecting Two Circuits and a Domestic Hot Water Tank after the Mixing Tank17
- Hot Water Storage Tank Connection18
- Pool Connection22
- Connecting the Options24
- Connection in Cascade25
Commissioning27
Control Panel27
- Description of the Keys27
- Description of the Display28
  - Operating Modes29
  - Other Information30
- Access to the Various Browsing Levels31
- Browsing in the Menus32
Putting the Appliance into Operation33
Checks and Adjustments after Commissioning34
- Displaying the Parameters in Extended Mode34
- Setting the Parameters Specific to the Installation34
- Naming the Circuits and Generators39
- Setting the Heating Curve40
Reading out Measured Values41
Modifying the User Settings43
- Setting the Set Point Temperatures43
- Selecting the Operating Mode44
- Forcing Domestic Hot Water Production45
- Setting the Contrast and Lighting on the Display45
- Setting the Time and Date46
- Selecting a Timer Programme46
- Customising a Timer Programme47
- Setting an Annual Clock49
Modifying the Installer Settings52
- Language Selection52
- Calibrating the Sensors52
- Professional Settings54
- Configuring the Network61
- Return to the Factory Settings64
Maintenance65
General Instructions for the User65
Chimney Sweep Instructions65
Customising Maintenance66
- Maintenance Message66
- Contact Details of the Professional for after Sales Support67
Troubleshooting68
Anti-Hunting68
Messages (Code Type Bxx or MXX)68
Message History71
Faults (Code Type Lxx or DXX)71
- Deletion of Sensors from the Memory in the PCB80
  - Failure History81
  - Control System Sequence84

Related product manuals

DeDietrich DIEMATIC 3

20 pages

DeDietrich EASYMATIC

2 pages

DeDietrich Diematic iSystem - Page 4

Table of Contents

Related product manuals