To Next PageTo Next PageHow to fix DeDietrich DOP1140X Oven that is not heating?
If your DeDietrich oven isn't heating, there are a few potential causes. First, make sure the oven is properly plugged into the power supply. Next, check the fuse in your electrical setup and replace it if necessary, ensuring it has a 16A capacity. Lastly, verify that the selected temperature isn't too low and increase it if needed.
What to do if the DeDietrich DOP1140X pyrolysis cleaning cycle does not begin?
If the pyrolysis cleaning cycle on your DeDietrich oven doesn't start, make sure the door is completely closed and locked. If the issue persists, it may indicate a defective locking system.
What to do if the DeDietrich DOP1140X Oven light is not working?
If the oven light in your DeDietrich oven isn't working, the bulb might need replacing. Also, ensure that the oven is properly connected to the power supply and that the fuse is working; plug in the oven or replace the fuse if necessary.
Why is my DeDietrich DOP1140X Oven beeping?
Your DeDietrich oven may beep for a couple of reasons. If it beeps during cooking, it means the recommended temperature has been reached. If it beeps at the end of a cooking cycle, it signals that your programmed cooking cycle is finished.
Why does the DeDietrich DOP1140X cooling fan continue to operate?
The cooling fan in your DeDietrich oven is designed to continue operating for up to an hour after cooking, especially if the oven temperature is above 125°C. To cool down the oven faster, you can open the oven door. If the fan runs longer than one hour, it could signal a problem.
General| Type | Built-in oven |
|---|---|
| Oven type | Multifunction |
| Energy efficiency class | A |
| Control type | Electronic |
| Display type | LCD |
| Cleaning system | Catalytic |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Installation type | Built-in |
| Color | Stainless steel |
| Door | Triple glazed |
| Cooling fan | Yes |
| Child lock | Yes |
| Timer | Yes |
| Programmable | Yes |
| Warranty | 2 years |
| Self-cleaning | Yes |
General safety precautions for operating the oven, including keeping children away.
Information on recycling packing materials and the appliance itself according to EU directives.
Guidelines for selecting the optimal location for oven installation within cabinetry.
Steps to properly attach the oven into the cabinetry using screws for stability.
Detailed instructions for connecting the oven to the power supply, including voltage and wiring requirements.
Overview of oven accessories, including safety grid and multi-purpose tray with sliding rails.
Instructions for cleaning the oven's exterior, including the programmer window and door.
Detailed procedure for safely removing and cleaning the oven door glass.
Explanation of the self-degreasing catalytic enamel and recommendations for its maintenance and use.
Step-by-step guide on how to detach and reattach wire shelf supports for cleaning.
Instructions for replacing the catalytic side panels when their self-degreasing function diminishes.
Explanation of the pyrolysis cleaning cycle, its purpose, and safety precautions.
Guidance on when to use the pyrolysis cleaning function based on cooking messiness and oven soiling.
Procedure for safely replacing the oven light bulb, including specifications and tips.
Information on how to book service calls and what details to provide.
