EasyManua.ls Logo

DeDietrich MUSE40-2 - R32 Refrigerant Fluid

DeDietrich MUSE40-2
59 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20181270 CR v8-2019Page 10
R32 refrigerant fluid
Emergency number: INRS/ORFILA poison control centre +330145425959
Effects harmful to health:
The vapours are heavier than air and may lead to asphyxia owing to reduced oxygen levels.
Liquefied gas: contact with the liquid may cause serious frost burn and eye injuries.
Flammability risk as per the concentration in air.
R32 (difluoromethane CH2F2) is a methane molecule that has 2 chlorine atoms in place of 2 hydrogen atoms.
Because it is used PURE and not mixed with other substances, R32 also has the advantage of not breaking down in
the refrigerant circuit, which can cause a loss of efficiency.
Name
Proportion
CE number
CAS number
Difluoromethane R32
100%
200-839-4
75-10-5
First aid
If inhaled:
-Remove the subject from the contaminated area and to fresh air.
-In case of sickness: contact a doctor.
In case of skin contact:
-Treat frost burn like an ordinary burn. Rinse with plenty of warm water, do not remove
clothing (risk of sticking to the skin).
-If burns occur, contact a doctor immediately.
In case of contact with the eyes:
-Rinse with water immediately, holding the eyelids apart (at least 15 minutes).
-Consult an ophthalmologist immediately.
Fire prevention
measures
-Suitable extinguishing agents: all extinguishing agents can be used.
-Unsuitable extinguishing agents: none known. In the event of fire nearby, use the
appropriate extinguishing agents.
-Pressure elevation: in the presence of air, a flammable mixture may form under certain
temperature and pressure conditions.
-Effect of heat: release of toxic and corrosive vapours.
-Special intervention methods: cool the volumes exposed to heat with water spray.
-firefighter protection:
-Full self-contained breathing apparatus.
-Full body protection.
In case of
accidental
dispersal
Individual precautions:
-Avoid contact with eyes and skin.
-Do not intervene without suitable protective equipment.
-Do not breathe vapour.
-Evacuate the danger zone.
-Stop the leak.
-Eliminate all ignition sources.
-Mechanically ventilate the spillage zone.
Cleaning/decontamination: allow any residual product to evaporate.
In case of eye contact: rinse with water immediately, holding the eyelids apart (at least 15
minutes).
Consult an ophthalmologist immediately.
Handling
-Technical measures: ventilation
-Precautions to be taken
-No smoking.
-Prevent the build-up of electrostatic charges.
-Work in a well ventilated place.
Personal
protection
-Respiratory protection:
-If ventilation is insufficient: AX type cartridge mask.
-In confined spaces: self-contained breathing apparatus.
-Hand protection: protective gloves in leather or nitrile rubber.
-Skin protection: clothing made mostly of cotton.
-Industrial hygiene: do not drink, eat or smoke in the workplace.
Disposal
recommendations
Important
Disposal must comply with applicable local and national regulations.
-Product waste: consult the manufacturer or the supplier for information on recovery or
recycling.
-Soiled packaging: reuse after decontamination. Destroy in authorised installations.
Regulations
-Regulation (EU) no. 517/2014 of the European Parliament and of the Council of 16th
April 2014 on fluorinated greenhouse gases and repealing regulation (EC) no. 842/2006.
-Installations Classified for Environmental Protection (ICPE) France no. 1185.