Dee Zee DZ 43200 - Step 4: Remove Cable Bolt; Step 5: Reinstall Bolt; Step 6: Attach Shock to Bolt; Step 7: Attach Shock to Ball Mount

STEP 4)
STEP 5)
STEP 6)
STEP 7)
Use a T50 torx socket or the
Install the bolt removed from
Install the cable back onto
Install the narrow end of the
wrench provided to remove the
the previous step through the
the cable bolt, and the
shock on the ball mount
cable bolt. Remove the tailgate
hole in the ball mount plate back
larger part of the shock
previously installed.
cable from the bolt.
into the hole.
on the ball mount.
Tighten the bolt with the T50.