-13-
9.0 CHARGING
USB Adapter
(5V/1A)
Power Bank
1) When the drone battery runs low, the indicator lights on the drone will
blink continuously.
2) Connect the battery with the USB charging cable.
3) Plug the USB charging cable into a USB charging port on a power bank
or a USB adapter (5V/1A).
4) When the battery is charging, the indicator light on the USB charging
cable is red.
When the battery is charged, the indicator light on the USB charging
cable turns green.
5) The charging time is about 160 minutes.
· Before charging, please read the instructions in the “Use of Battery”
section of the “Safety Guidelines” carefully!
· DO NOT charge a battery immediately after a ight as the temperature
may be too high. Please wait until it cools down to room temperature
before charging again.
To Next Page
Loading...
