Deerc D60 - Using the APP; Connect to Wi-Fi

-14-
10.2 Connect to Wi-Fi
Connect your phone to the Wi-Fi network created by the drone. You can
check the drone’s status on the Deerc FPV App.
① Make sure to turn o Bluetooth, Mobile Data, and VPN. Enter your
phone’s Wi-Fi settings and click Wi-Fi to search for the Wi-Fi of the drone.
(Make sure to turn on the drone before going to the Wi-Fi settings on your
phone)
② Select the Wi-Fi network: DeercFPV-******.
③ Wait for a couple of seconds for your phone to connect to the drone’s
Wi-Fi.
④ Enter the Deerc FPV application.
> The connection between your phone and the drone is established
automatically.
Attention: The Wi-Fi network created by the drone does not access the
Internet.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
iOS Android APP on Google play
Scan the QR code, corresponding to either App Store™ or Google Play™
Store, and download the Deerc FPV app for free.
Required Operating Systems: iOS 12.0 or later/Android 4.4 or later.
10.1 Download APP
10.0 USING THE APP