-15-
11.1 Pairing
④ Push the left joystick up then
down to pair the drone with the
transmitter. The indicator lights on
the drone and the transmitter will
turn solid if the drone is paired
successfully.
③ Short press the power switch
button on the transmitter to turn it
on, and you will hear a “Di” sound,
then the indicator lights on the
transmitter will ash.
HEAD
All of the following operations on this manual uses MODE 2.
② Place the drone on a at and level
surface with the head forward and
the tail facing towards the pilot.
① Long press the power switch to
turn on the drone. The indicator
lights of the drone will keep ashing.
11.0 OPERATION GUIDE
Long press
To Next Page
Loading...
