Troubleshooting
Before troubleshooting, turn off the power source and
remove the plug from the outlet.
Safety notes
1. Before starting to use the device, carefully read the contents
of this manual. Assembly of the device should be carried out in
accordance with the given order;
2. Use of the device other than in accordance with this manual
may result in damage or personal injury.
3. Before turning on the power, make sure that the nominal
power supply voltage meets the requirements indicated on
the device nameplate (220V, 50 Hz);
4. The product is suitable for use in homes, hotels, educational
institutions and other closed spaces, it should not be used to
remove industrial or metal waste and dust;
5. The product is not intended for use by persons with impaired
physical or cognitive functions, as well as persons without the
necessary knowledge and experience (including children),
except for cases of use under the supervision of another
person capable of ensuring their safety;
6. The device should not be used in potentially dangerous
environments, such as car gas stations, fuel and lubricant
storage facilities, chemical industry enterprises and other
explosive and fire-hazardous places;
Troubleshooting
Decision
Contamination of brushes
Clean the brushes from
contamination
Contamination of the filter
Clean or replace the filter
Stop cleaning, wait until
the engine cools down
Low suction power or
strange noises
The motor of the vacuum
cleaner does not work
The device stopped
working unexpectedly
Check whether the power
plug is correctly installed in
the outlet
Turn off the device,
disconnect the power plug,
clean the dust collector of
debris. Wait for the engine to
cool down.
To Next Page
Loading...
