3. Start-Lock Time Setting
: Press the ‘▽’ key in the Unbalance Rate Setting to enter into the Start-Lock Setting Screen. Then, the ‘SET’
indicator will blink.
: The ‘TIME’ and the ‘PICKUP’ will be on. Press the ‘SET’ key to change the set value.
‘M’ key: Shift
☆ SET Range : 1.0 to 60.0sec (0.5 step)
‘△’ key : value increase
‘▽’ key : value decrease
‘SET’ key : value save
- Set the stabilization time upon the motor start-up and Unbalance ‘Operation’ will not work within the set
time.
To Next Page
Loading...
