Need help?Do you have a question about the DEFA Balancer and is the answer not in the manual?
General| Product name | DEFA Balancer |
|---|---|
| Product or component type | Current sensor |
| Product specific application | Load monitoring |
| Product destination | Switchboard |
| Tightening torque | 0.5Nm |
| Safety | IEC 61010-1 |
| Maximum current [Imax] | [dependent on current sensor] |
| Starting current | [min. load current possible to measure] |
| Supply voltage | 100-240 V AC, +/-10% |
| Power consumption | 0.03 A |
| Maximum input voltage | 0.333 VRMS AC |
| Type of measurement | Current |
| Accuracy | +/- 2% |
| Metering type | Current L1, L2 and L3 |
| Range compability | DEFA Power |
| Frequency | 50/60 Hz |
| Transmission medium | Radio frequency 2.4 GHz or 5 GHz (Wi-Fi), Ethernet |
| Radio/EMC | 2014/53/EU - RED |
| Antenna connector | SMA female |
| Cable entry | 0.2-2.5 mm2 / (AWG18 - AWG14) |
| Mounting mode | DIN rail |
| Number of modular spacings | 2 |
| Operating altitude (m.a.s.l) | 0.2000 m |
| Ambient air operating temperature | -25°C to +60°C |
| Ambient air storing temperature | -30°C to +70°C |
Provides the recommended sequence for installing the DEFA Balancer.
Crucial safety warnings and precautions for installing the DEFA Balancer.
Details what is included and a description of the DEFA Balancer unit.
Covers planning, necessary tools, and accessories for installation.
Details network requirements, installation steps, and setup process.
Explains the meaning of different LED states on the DEFA Balancer.
Provides detailed technical data and specifications for the DEFA Balancer.
Instructions for maintenance, warranty terms, and waste disposal.
Provides DEFA's contact details for support and inquiries.
To Next Page