DEFA Balancer User Manual

EN
defa.com 24
Contractual warranty
Warranty
This product holds the same legal guarantee period and warranty period prescribed in the country
where the product was purchased. The guarantee and warranty is only valid by the legal provision of
the country of purchase – the guarantee or warranty is not transferable. DEFA’s warranty obligations
will not apply if the product is damaged due to accident, abuse or other external causes, or if any non-
authorized modifications have been performed or guidelines have not been followed during the
service/repair. Approved repairs by DEFA do not affect the warranty (if the repairs have been made in
accordance with the guidelines and are performed by a DEFA authorized technician).
DEFA guarantees the DEFA branded product contained in the original packaging to be without defects
within the legal guarantee period, where applicable defects are limited to those originating from
normal use and obvious material or manufacturing defects. DEFA will in such cases attempt to restore
the product to the intended function. Claims will be rejected if damage can be shown to be the result
of improper use, modifications, non-authorized repairs or force majeure. All installation steps must be
performed by a certified installer, otherwise the guarantee and warranty will become void. If the
product is defect or malfunctioning due to improper installation, any guarantee and warranty will
become void. For more information regarding guarantee and provisions please visit defa.com
Waste management
At the end of service life, dispose of the product according to local rules and do not dispose the
product with regular household waste. The correct disposal of your product will help prevent potential
negative consequences for the environment and human health.

DEFA Balancer Specifications

General

Product name	DEFA Balancer
Product or component type	Current sensor
Product specific application	Load monitoring
Product destination	Switchboard
Tightening torque	0.5Nm
Safety	IEC 61010-1
Maximum current [Imax]	[dependent on current sensor]
Starting current	[min. load current possible to measure]
Supply voltage	100-240 V AC, +/-10%
Power consumption	0.03 A
Maximum input voltage	0.333 VRMS AC
Type of measurement	Current
Accuracy	+/- 2%
Metering type	Current L1, L2 and L3
Range compability	DEFA Power
Frequency	50/60 Hz
Transmission medium	Radio frequency 2.4 GHz or 5 GHz (Wi-Fi), Ethernet
Radio/EMC	2014/53/EU - RED
Antenna connector	SMA female
Cable entry	0.2-2.5 mm2 / (AWG18 - AWG14)
Mounting mode	DIN rail
Number of modular spacings	2
Operating altitude (m.a.s.l)	0.2000 m
Ambient air operating temperature	-25°C to +60°C
Ambient air storing temperature	-30°C to +70°C