DEFA Balancer User Manual

EN
defa.com 22
Technical specifications
Product name DEFA Balancer
Product or component type Current sensor
Maximum current [Imax] [dependent on current sensor]
Starting current [min. load current possible to measure]
Product specific application Load monitoring
Type of measurement Current
Accuracy +/- 2%
Metering type Current L1, L2 and L3
Product destination Switchboard
Transmission medium Radio frequency 2.4 GHz or 5 GHz (Wi-Fi), Ethernet
Antenna connector SMA female
Range compability DEFA Power
Mounting mode DIN rail
Cable entry 0.2-2.5 mm2 / (AWG18 - AWG14)
Tightening torque 0.5Nm
Supply voltage 100-240 V AC, +/-10%
Frequency 50/60 Hz
Power consumption 0.03 A
Safety IEC 61010-1
Number of modular spacings 2
Radio/EMC 2014/53/EU - RED
Operating altitude (m.a.s.l) 0...2000 m
Ambient air operating temperature -25°C to +60°C
Ambient air storing temperature -30°C to +70°C
Maximum input voltage 0.333 VRMS AC

DEFA Balancer Specifications

General

Product name	DEFA Balancer
Product or component type	Current sensor
Product specific application	Load monitoring
Product destination	Switchboard
Tightening torque	0.5Nm
Safety	IEC 61010-1
Maximum current [Imax]	[dependent on current sensor]
Starting current	[min. load current possible to measure]
Supply voltage	100-240 V AC, +/-10%
Power consumption	0.03 A
Maximum input voltage	0.333 VRMS AC
Type of measurement	Current
Accuracy	+/- 2%
Metering type	Current L1, L2 and L3
Range compability	DEFA Power
Frequency	50/60 Hz
Transmission medium	Radio frequency 2.4 GHz or 5 GHz (Wi-Fi), Ethernet
Radio/EMC	2014/53/EU - RED
Antenna connector	SMA female
Cable entry	0.2-2.5 mm2 / (AWG18 - AWG14)
Mounting mode	DIN rail
Number of modular spacings	2
Operating altitude (m.a.s.l)	0.2000 m
Ambient air operating temperature	-25°C to +60°C
Ambient air storing temperature	-30°C to +70°C