EasyManua.ls Logo

DEFENDERTECH MF-50 - User Manual

Default Icon
51 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Question and Answer IconNeed help?

Do you have a question about the DEFENDERTECH MF-50 and is the answer not in the manual?

Summary

General Safety Warnings

Appliance Usage and Handling Precautions

Guidelines for proper use, handling, and electrical safety of the appliance.

Burn Hazard and Fogging Risks

Information on burn risks, fog accumulation, ventilation, and residue.

Warranty and Liability Conditions

Warranty Terms and Exclusions

Details the product warranty, its duration, and common exclusions.

Warranty Claim Procedures

Outlines the steps for reporting defects and conditions for warranty validity.

Regulatory Compliance and Warning Labels

Mandatory Warning Signage

Italian law requires posting a warning sign about the fog cannon's presence.

Installation and Mounting

Wall or Ceiling Mounting

Instructions for secure wall or ceiling installation, including distance and fixings.

Floating Installation Method

Guidance for floating installations using threaded bars and nuts.

Electronic Board Description

Electrical Connection

230 Vac Power Connection

Details on connecting the 230V power supply to the device's PCB.

Indicator Lights and Status

Indicator Light Meanings

Explanation of the status indicated by ARM, HEAT, LOW, FAULT, and BAT LEDs.

Input-Output Signal Connections

12 V DC and COM Terminal Connections

Connecting the 12V DC power and common terminal for device control.

ARM Input Configuration

How to arm the device and the resulting indicator changes.

Fog Generation Control

FOG Input Operation and Duration

How to activate fog shots, duration control, and pause cycles.

Climate Control and Ventilation Warning

Caution against fogging in air-conditioned environments and evacuation needs.

External Status Output Signals

Explanation of external status outputs for ARM, HEAT, LEVEL, FAULT, BATTERY.

Configuration and Operation Modes

Jumper Settings and Fault Reset

Configuration options via jumpers for shot duration, I/O modes, and fault reset.

Burner and Shot Management

Activation of the burner and conditions that inhibit fog shots.

Backup Battery Management

Battery Health and Status Monitoring

Monitoring battery status, low charge indicators, and fault conditions.

System Start-up and Testing

Independent Testing Procedure

How to test the device without an alarm panel using COM, ARM, FOG terminals.

Testing with Water

Using water for testing to check interface without fog saturation.

Tank Installation

Initial Startup Steps

Connecting Power and Arming

Steps to connect the 12V battery/supply and arm the appliance.

Maintenance Procedures

Optional and Annual Maintenance Tasks

Recommended maintenance tasks for optimal pump efficiency and device health.

Battery Replacement and Electrical Checks

Procedures for replacing backup batteries and checking power supply cables.

Absorption Measurement and Shot Testing

Measuring electrical absorption and performing complete shots for diagnostics.

Fluid Tank Refill and Level Reset

Refilling the fluid tank and resetting the liquid level indicator.

Non-Conformity Handling

Actions to take if non-conformities are detected in specific maintenance points.

Conformity Declaration

Manufacturers Compliance Statement

Manufacturer's declaration of compliance with EU directives and technical standards.

DEFENDERTECH MF-50 Specifications

General IconGeneral
Fluid Tank Capacity1.5 liters
Heating Time5 minutes
Voltage120V
Remote ControlYes
Timer FunctionYes

Related product manuals