10
Problem Solution
What is the reset procedure for the 48 LED Solar Motion Light? 1. Turn the main switch to OFF.
2. Turn all three dials completely clockwise.
3. Turn the main switch to ON for 2 seconds and back to OFF.
4. Turn the LUX dial completely counter-clockwise.
5. Let the light recharge for 2 days.
6. Turn the main switch to Auto again. Observe if the light resumes
normal operation at nighttime.
7. If at night the unit is still not responding to motion, slowly turn
the LUX dial clockwise until the unit is activated. This last step
will further adjust the light sensitivity to the surrounding environment.
Troubleshooting (continued)
To Next Page
Loading...
