PAGE 4 OF12
Fitting the removable splashback
Remove the splashback (B)
(recessed in the polystyrene) from the
polystyrene packaging.
Align the 4 splashback holes with the
4 holes on the top back of the stove.
Insert screws numbered 1, 2, 3 & 4
through the splashback into the stove.
Fasten the screws 1, 2, 3 & 4 to
secure the splashback in place as
indicated in the diagrams.
Please see instructions on the previous page regarding correct fitment and
securing of the anti tilt mechanism (A) to the wall.
To Next Page
Loading...
