Defy AC12H3 - Page 12

Page 12
Automatic operation mode
1. Press the “MODE” button, select the
automatic operation mode.
2. By pressing the “SPEED” button, you can
select the fan speed from LOW, MID, HIGH,
AUTO.
3. Press the “ON/OFF” button, the air-
conditioner starts to operate.
4. Press the “ON/OFF” button again, the air-
conditioner stops.
Note: In the fan operation mode,
the temperature settings is non-
effective.
Cooling/Heating operation mode
1. Press the “MODE” button, select the
Cooling or Heating operation mode.
2. By pressing the “ a ”or “ b ”button, you
can set the temperature range from 16°C
(60°F)~32°C(90°F), the display changes as
you touch the button.
3. By pressing the “SPEED” button, you can
select the fan speed from LOW, MID, HIGH,
AUTO.
4. Press the “ON/OFF” button, the air-
conditioner starts to operate.
5. Press the “ON/OFF” button again, the air-
conditioner stops.
Note: Cold wind types have no
heating function.
Warning: Do not break, pull the
batteries apart or throw them into a
fire. There is a risk of explosion and
fire.
1. Press the “MODE” button, select the fan
operation mode.
2. By pressing the “SPEED” button, you can
select the fan speed from LOW, MID, HIGH.
3. Press the “ON/OFF” button, the air-
conditioner starts to operate.
4. Press the “ON/OFF” button again, the air-
conditioner stops.
Fan operation mode
Note: In the fan operation mode,
the temperature settings is non-
effective.
1. Press the “MODE” button, select the
drying operation mode.
2. By pressing the “ a ”or “ b ” button, you
can set the temperature range from 16°C
(60°F)~32°C (90°F), the
display changes as you touch the button.
3. By pressing the “SPEED” button, you can
select the fan speed from LOW, MID, HIGH,
AUTO.
4. Press the “ON/OFF” button, the air-
conditioner starts to operate.
5. Press the “ON/OFF” button again, the air-
conditioner stops.
Drying operation mode
The remote controller has a backlight which
can be turned on by pressing any button for
the convenience of operation in darkness.
The backlight will be automatically turned off
if there is no operation within 10 seconds.
Backlight function (Some models)