Page 8
Remote controller
Using your air conditioner
3
Note: The appearance and functions of the remote controllers may vary slightly from
model to model. Some indicators and functions on your remote control may not be
applicable to the model you have purchased.
Precautions
x Before first time use of the remote
controller, install the batteries and ensure
the “+”and “-” poles are correctly
positioned.
x Ensure the remote controller is pointed to
the signal receiving window, and that
there is no obstruction in between and the
distance is 8m at the maximum.
x Do not let the remote controller drop or
fling it at will. Do not let any liquid in the
remote controller. Do not expose the
remote controller directly to the sunlight or
excessive heat.
x If the remote controller does not function
normally, remove the batteries for 30
second before reinstall them. If that
doesn't work, replace the batteries.
x When replacing the batteries, do not mix
the new batteries with old ones or mix
batteries of different types, which could
cause failure of the remote controller.
x If the remote controller is not to be used
for a long period of time, remove the
batteries first, lest the leakage from them
may damage the remote controller.
x Properly dispose the discarded batteries.
Note:
This is a universal remote controller and may
cover a variety of models. Some of the
buttons may not be applicable to the
particular model you have purchased. If so,
these will not function on your model. (If a
specific function is not available on the air
conditioner, pressing the corresponding
button will have no effect).
To Next Page
Loading...
