Page 11
Reversing the Door
Tools required: Philip’s screwdriver, Flat
bladed screwdriver, Hexagonal spanner.
x Ensure the unit is unplugged and empty.
x To remove the door, it is necessary to tilt
the unit backwards. Rest the unit on
something solid so that it will not slip
during the door reversing process.
x All parts removed must be kept for the
reinstallation of the door.
x Do not lay the unit flat as this may
damage the coolant system.
x Having 2 people handle the unit during
assembly will make the job easier.
1. Unscrew hinge cover
2. Open the door and unscrew the top hinge.
Then take the door from the
cabinet and place it on a soft pad to avoid
damage.
3. Remove the cover and screws from the
left side and fit them to right side.
4. Carefully lay the fridge down on the rear
of the cabinet on a soft pad. Remove the two
levelling feet first. Then unscrew the door
hinge and left foot base.
Caution! If there is a screw at left front
corner, remove it before fitting the hinge.
To Next Page
Loading...
Need help?
General
