Page 12
5. Unscrew and remove the bottom hinge
pin, turn the bracket
over and refit it.
12. Stand the unit
upright and put the door
on the bottom hinge. Ensure the bottom
hinge pin is inserted in the door hole. Then
fit the upper hinge to the door. Before
tightening the upper hinge, try and open the
door to check whether the cabinet is sealed
well. Finally, screw the hinge cover to the
hinge.
6. Fit the hinge to the top left side and foot
base to the right side. Then fasten the two
levelling feet with their original parts.
7.Unscrew top hinge pin and mount it to the
left hole.
To Next Page
Loading...
Need help?
General
