PAGE 8 OF19
Solid plate - care guide
SWITCH THE PLATE ON FOR A
SHORT PERIOD TO DRY
TO CLEAN THE PLATE - WIPE IT WITH A DAMP
CLOTH OR NYLON SCOURING PAD
USE POTS THAT ARE SLIGHTLY
BIGGER THAN THE PLATE
AND THAT HAVE A SMOOTH FLAT BASE
BEFORE USING THE PLATES FOR THE FIRST TIME
SWITCH THEM ON FOR FOUR MINUTES
AT THE HIGHEST SETTING
THIS ALLOWS THE PROTECTIVE COATING
TO BURN IN
TO INHIBIT CORROSION, PERIODICALLY APPLY
SALT-FREE VEGETABLE OIL,
SEWING MACHINE OIL OR
ELECTRICAL HOT-PLATE POLISH,
(AVAILABLE FROM DEFY SERVICE CENTRES)
DO NOT USE ONE POT ON TWO PLATES
DO NOT USE A POT WITH AN UNEVEN BASE
DO NOT USE A POT WITH A DIRTY OR WET BASE
DO NOT USE A POT ON AN UNMATCHED PLATE
TO CONSERVE ENERGYAND AVOID SPILLS
WE RECOMMEND
YOU KEEP A LID ON THE POT.
DO DON”T
To Next Page
Loading...
Need help?
General
