¼ÇÒäµç̨
1. Set the scan method to MEM by press till MEM
appears in the display.
2. Press SCAN+ or SCAN- repeatedly to display the desired
preset number.
Memory Scan Tuning
If you remember the preset page and preset number clearly,
you can press them directly to tune into the station.
After the highest preset number has been scanned, the
unit will return to the smallest preset number and scan
again.
The unit will circulated scan between page 1-6.
9
13
14
There are total 10 pages (Page 0-9) for you to preset stations.
Up to 19 stations can be preset on each page. All preset stations
are permanent store. Each page is assigned as:
Page 1 to 6 : Random preset, no band limited
Page 7 : For FM band only.
Page 8: For MW band only.
Page 9: For SW band only.
Page 0: For ATS function, random preset.
Random Preset (On Page 1-6)
PRESET STATIONS
1. Turn on the unit.
2. Tune into a desired station by manual tuning, scan tuning or
direct entry.
3. Press Page button , page indicator P will flash for 3
seconds, page number disappears for you to enter.
5
To Next Page
Loading...