Safety Section
If the filters are correctly fitted, the machine will not release any collected substance into the
environment.
In case the machine is used to vacuum toxic-harmful substances, the emptying of the collection
container as well as the filter cleaning operations must be execute using the appropriate safety
devices required to protect the operator from the collected substances.
Do not lay any object or material on the horizontal guards.
The machine case containing mobile parts must not be removed by the operator.
Mind other people, especially children, when operating the vacuum.
Handle the machine carefully, specially on slopes or ramps.
Do not turnaround the machine on slopes.
Set on the wheel brake to ensure that the machine position is stable.
Cleaning, maintenance and part replacement operations must always be executed after having
switched off and unplugged the machine and must be done in safe areas with damp cloth.
Repair operations must be executed by qualified personnel only.
Be careful not to damage or squash the supply cable (cord) when operating the machine.
Check the supply cable on regular basis. Do not use the machine If the cable is damaged.
In case of cable, tap or connector replacement, ensure protection against water and check
mechanical strength.
Do not drag the machine by pulling the supply cable and the suction hose.
The final user must provide for the collected substances waste disposal in compliance with the
applicable laws and regulations in force.
Machine overhaul is recommended after 10 years of life. The overhaul should be performed by
DELFIN Srl
, the manufacturer.
The machine is delivered to the final user with the following documentation: instructions manual
spare part list, declaration of conformity, warranty certificate, homologation certificate, electrical
and pneumatic technical files.
The manufacturer will not be liable for any damage which may occur in connection with the use
or service of vacuum supplied in case it is utilized with tools or accessories that have not been
provided by
DELFIN Srl
. Without prejudice for the above, it is recommended to keep the machine
construction complying with the safety standards prescribed by the
NFPA 70 (NEC) and C.E.C.
.
Keep the vacuum clean and free of any contamination material such as dust, debris or oil.
Moreover, keep it away from tools or other objects which may affect the machine efficiency and
cause damage and/or injury.
Do not use flammable or toxic solvents, such as gasoline, benzene, ether and alcohol for
cleaning.
To Next Page
Loading...
