Maintenance Section
5.4 Replacing the filters
To replace the filters, proceed as follows:
➢ Turn off the vacuum cleaner by turning the main switch to the “OFF “ position.
➢ Disconnect the vacuum cleaner plug from the power socket.
WARNING!
Wear individual protection devices.
ATTENTION!
Porter les dispositifs de protection individuelle.
➢ Lose the clamp (1) and remove the bag filter (2), then remove the absolute filter (3). To
remove the absolute filter unscrew the handwheel (4) and the handwheel (5) and
unscrewing the four screws placed on a base plate.
Fit the new filters and put everything back in place.
To Next Page
Loading...
