Safety Section
Before executing vacuuming operations, always set on the vacuum wheel brake provided to
ensure that the vacuum position is stable.
The supply cable tap must be correctly plug in the current outlet in NON CLASSIFIED
atmosphere, or rather in a safety place.
2.2.1 Grounding Instruction
This vacuum must be grounded. If it should malfunction or breakdown, grounding provides a path
of least resistance for electric current to reduce the risk of electric shock. This appliance is
equipped with a cord having an equipment-grounding conductor and grounding plug. The plug
must be inserted into an appropriate outlet that is properly installed and grounded in accordance
with all local codes and ordinances.
WARNING!
Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or service person if you are in
doubt as to whether the outlet is properly grounded. Do not modify the plug
provided with the appliance – if it will not fit the outlet, have a proper outlet installed
by a qualified electrician.
ATTENTION!
Un branchement non conforme du conducteur de mise à la terre peut comporter
le risque de décharges électriques. Il est conseillé de faire appel à un électricien
qualifié ou au personnel d’assistance en cas de doutes sur la mise à la terre. Il est
interdit de modifier le plug fourni avec l’appareil – s’il n’est pas compatible avec la
prise, il sera nécessaire de faire installer une prise adaptée par un électricien
qualifié.
Connect the grounding clamp with a conductive surface connected with earth, as shows in the
picture below: