Operation Section
4.2 Work cycle
WARNING!
Before fitting the plug, make sure the power voltage corresponds to that on the
product marking plate.
ATTENTION!
Avant d’insérer la fiche, s’assurer que le voltage de la ligne d’alimentation
correspond à celui figurant sur la plaque signalétique.
WARNING!
Operations permitted within Class II Division 2 Group F and G class areas, with
potentially explosive atmosphere.
ATTENTION!
Opérations autorisées dans la Class II Division 2 Group F and G avec la présence
de atmosphère potentiellement explosive.
WARNING!
The operator using the vacuum must always wear anti-static cloths and antistatic
shoes.
The working environment and the floor must comply with antistatic standards.
ATTENTION!
L’opérateur doit être habillé avec de vêtements et chaussures antistatique.
Le pavement et l’ambiant où on va utiliser l'aspirateur doivent être antistatique.
➢ Ensure that the supply cable tap is correctly plug in the current outlet having the voltage
required and indicated on the vacuum control panel.
➢ Ensure that the flexible hose is duly fitted and locked in the specific suction plug.
➢ Ensure that the supply cable (cord) and the eventual extension are in perfect conditions.
➢ Set on the wheels brake to ensure that the machine is stable.
To Next Page
Loading...
