Safety Notice
Please carefully read this manual before the installation, operation, running, maintenance and inspection of
this product, and install and use this product properly in line with this manual.
Danger:
Do not operate the circuit breaker with your wet hands.
Do not touch the live part during operation.
Do not maintain and repair the live product.
Do not use the short-circuit method to test the product.
Attention:
The installation, maintenance and repair of the product should be carried out by the qualified
professionals.
Do not dismantle or adjust the product without permission during operation as all characteristics of
the product have been set at the factory;
Before use, confirm that the rated voltage, rated current, frequency and features of the product meet
the working requirements.
In order to prevent short circuit between phases, the bare wires or copper busbars of terminals should
be insulated;
If found damage or abnormal sound when unpacking, stop using the product immediately and contact
the supplier;
This product is not suitable for special occasions such as frequently started motors, electric heating
equipment, capacitor cabinets, high inductive or high capacitive loads and high temperature environments;
To scrap the product, the appropriate product waste disposal is required. Thanks for your cooperation.
To Next Page
Loading...
