Dell EMC H740P - HII Configuration Utility Guide; Entering the HII Configuration Utility; Navigating to Dell PERC 10 Configuration Utility

HII conguration utility
The Human Interface Infrastructure (HII) conguration utility is a storage management application integrated into the System BIOS <F2>. It
is used to congure and manage RAID disk groups, virtual disks, and physical disks. This utility is independent of the operating system.
Topics:
• Entering the HII conguration utility
• Exiting the HII conguration utility
• Navigating to Dell PERC 10 conguration utility
• HII Conguration utility Dashboard View options
• Conguration management
• Controller management
• Virtual disk management
• Physical disk management
• Hardware components
Entering the HII conguration utility
Perform the following steps to boot to the HII conguration utility:
1 Turn on the system.
2 While the system startup, press <F2> to enter System Setup.
3 Click Device Settings.
Device Settings screen lists all the RAID controllers in the system.
To access the management menu for the controller, use the arrow keys or the mouse.
NOTE
: For more information in all the options, click Help that is available on the top right-hand corner of the browser
screen. Help information for individual option menus can also be viewed by scrolling down on each option.
NOTE: Some of the options within the HII conguration utility are not present if the controller does not support the
corresponding feature. Options may also be grayed out if the feature is supported in existing conguration.
Exiting the HII conguration utility
To exit the HII conguration utility, perform the following steps:
1 Click Finish at the bottom-right corner on the System Setup Main Menu screen.
Displays a warning message to conrm your choice.
2 Click Yes to exit the HII conguration utility.
Navigating to Dell PERC 10 conguration utility
1 Enter the UEFI conguration Utility. See Entering the HII conguration utility.
The Device Settings screen displays a list of NIC ports and the Dell PERC 10 conguration utility.
2 To enter PERC 10 conguration utility, click Dell PERC 10 Conguration Utility.
7
HII conguration utility 43