Dell EMC H740P - Controller Management

The following list of RAID modes are displayed:
• Generic RAID 0
• Generic RAID 1
• Generic RAID 5
• Generic RAID 6
• File Server
• Web/Generic Server
• Database
3 Based on the RAID mode selected, one or more the physical disk selection criteria is displayed.
4 From the Physical Disk Selection Criteria drop-down box, select a criterion based your requirement.
The Prole Parameters of the selected option is displayed.
5 Click Create Virtual Disk.
6 Select Conrm and click Yes to continue.
The virtual disk is created with the parameters of the prole selected.
Viewing Disk Group Properties
1 Enter the Dell PERC 10 Conguration Utility. See Navigating to Dell PERC 10 conguration utility.
2 Click Main Menu > Conguration Management > View Disk Group Properties.
The list of Disk Group # properties are displayed:
• Capacity Allocation — displays all the virtual disks associated with the specic disk group. It also provides information about the
available free space.
• Secured — displays whether the disk group is secured or not.
Deleting Congurations
1 Enter the Dell PERC 10 Conguration Utility. See Navigating to Dell PERC 10 conguration utility.
2 Click Main Menu > Conguration Management > Clear Conguration.
A screen is displayed asking if you are sure you want to perform the operation.
3 Select Conrm and click Yes to continue.
The virtual disks and hot spare disks available on the controller are deleted successfully.
Controller management
Clearing controller events
1 Enter the Dell PERC 10 Conguration Utility. See Navigating to Dell PERC 10 conguration utility.
2 Click Main Menu > Controller Management > Advanced Controller Management.
3 Click Clear Controller Events.
A screen is displayed indicating that the operation is completed successfully.
4 Click Ok.
HII
conguration utility 47