Need help?Do you have a question about the Dell EMC N3024ET-ON and is the answer not in the manual?
General| Device Type | Switch |
|---|---|
| Product Series | N-Series |
| Model | N3024ET-ON |
| Ports | 24 |
| Uplink Ports | 4 |
| Switching Capacity | 128 Gbps |
| Forwarding Rate | 95.2 Mpps |
| Power over Ethernet (PoE) | Yes |
| PoE Budget | 370W |
| MAC Address Table Size | 16K |
| Jumbo Frame Support | Yes |
| Input Voltage | 100-240V AC |
| Power Consumption (without PoE) | 30W |
| Form Factor | 1U |
| Management | Web, CLI, SNMP |
| Operating System | Dell Networking OS |
| Dimensions (W x D x H) - inches | 17.3 x 13.0 x 1.7 |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 10% to 90% (non-condensing) |
| Power Supply | Internal |
| Dimensions (W x D x H) | 440 x 380 x 44 mm |
Defines a CAUTION as a warning about potential hardware damage or data loss.
Defines a WARNING as a notice of potential property damage, personal injury, or death.
Guides connecting the switch to a computer for configuration via a terminal.
Details the process of connecting the switch to an AC or DC power source.
Details the steps for initial switch setup using the Easy Setup Wizard or CLI.
To Next Page