Need help?Do you have a question about the Dell EMC PowerSwitch N3224F-ON and is the answer not in the manual?
General| Model | N3224F-ON |
|---|---|
| Manageable | Yes |
| Jumbo Frame Support | Yes |
| PoE | No |
| Product Type | Switch |
| MAC Address Table Size | 128, 000 entries |
| Power Supply | Dual hot-swappable power supplies |
| Input Voltage | 100 to 240 VAC |
| Operating Temperature | 32° to 113°F (0° to 45°C) |
| Operating Humidity | 10% to 90% (non-condensing) |
| Management | CLI, SNMP |
| Latency | Less than 1 μs |
| Operating System | Dell Networking OS |
Details the various ports, CPU, memory, management interfaces, and power/fan options.
Covers rack mounting best practices and the critical steps for grounding the switch.
Explains fan airflow directions, cooling, and essential power connection guidelines.
Guides on how to carefully unpack the switch and verify all included items.
Details various methods for mounting the switch in racks or cabinets, including specific types.
Covers ceiling, wall, DIN rail, and different two-post rack mounting techniques.
Guides on powering up the switch post-installation and procedures for replacing a switch.
Step-by-step guide for installing AC or DC power supply units into the switch.
Instructions for connecting 550W and 1300W DC power supplies, including wiring details.
Procedures for installing and replacing fan modules to ensure proper cooling.
Procedure to uninstall any pre-existing OS before installing a new one via ONIE.
Guides for automatically installing a NOS via DHCP or manually via USB/network.
To Next Page